DRAFT
TM 5-4210-249-13&P-3
0424
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT04577
CAUTION
Wires may be connected on terminal block of vehicle in positions other than shown.
Two wires from roof turret solenoid must first be identified and then removed from
terminal block.
NOTE
Tag and mark wires and air lines prior to removal to ensure proper installation.
2.
Identify two wires (5) and (6) from roof turret control valve (7).
3.
Remove screw (8) and wire (5) from terminal block (9).
4.
Cut insulated eye (10) from wire (5) (TM 9-2320-325-14&P).
5.
Cut wire (6) (TM 9-2320-325-14&P).
6.
Remove two wires (5) and (6) from junction box (4).
NOTE
Lowering junction box allows access for removal of fittings and roof turret control valve.
7.
Remove locknut (11) and lower junction box (4) from screw (12) and frame (13). Discard locknut.
0424-2