DRAFT
TM 5-4210-249-13&P-3
FIELD LEVEL MAINTENANCE
ROOF, BUMPER, AND PUMP COOLER DUMP-TO-GROUND JUNCTION BOX REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
WP 0615, Fig. 170
(WP 0622, Item 27)
Equipment Conditions
Materials/Parts
Roof turret control valve removal (WP 0424)
Tags, Identification (WP 0625, Item 51)
Bumper turret and pump cooler dump-to-ground
Locknut (2)
control valve removed (WP 0370)
REMOVAL
TFFT04638
CAUTION
Wires may be connected on terminal block of vehicle in positions other than shown.
Note position of wires on terminal block prior to removal. Failure to comply may
not allow wires to be installed correctly.
NOTE
Tag and mark wires prior to removal to ensure proper installation.
1.
Remove screw (1) and wire (2) from terminal strip (3).
2.
Remove nut (4) and fitting (5) from junction box (6).
0423-1