DRAFT
TM 5-4210-249-13&P-3
0370
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT04597
13. Remove two fittings (17) and (21) from bumper turret valve (9).
14. Remove two fittings (16) and (20) from pump cooler dump-to-ground valve (10).
END OF TASK
INSTALLATION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
CAUTION
Use sealing compound sparingly only on pipe threads. Do not apply compound to
hose connections. Damage to equipment may result.
NOTE
Exhaust fitting will be adjusted at end of installation procedure.
1.
Apply sealing compound to threads of five fittings (16), (17), (20), (21), and (30), tee (26), exhaust fitting (29),
and muffler (31).
2.
Install two fittings (20) and (16) on pump cooler dump-to-ground valve (10).
3.
Install two fittings (21) and (17) on bumper turret valve (9).
0370-4