DRAFT
TM 5-4210-249-13&P-3
FIELD LEVEL MAINTENANCE
120-VOLT RECEPTACLE REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
WP 0615, Fig. 73
(WP 0622, Item 27)
Equipment Conditions
Materials/Parts
Water pump engine OFF (WP 0022)
Tags, Identification (WP 0625, Item 51)
Batteries disconnected (TM 9-2320-325-14&P)
REAR BODY PANEL RECEPTACLES REMOVAL
TFFT02811
NOTE
Both driver side and passenger side rear body panel receptacles are removed the same
way. Driver side receptacle shown.
1.
Remove four screws (1), washers (2), receptacle cover (3), and gasket (4) from rear body panel (5).
2.
Remove two screws (6), receptacle (7), and box (8) from rear body panel (5).
NOTE
Wires are still attached to receptacle. Only remove receptacle from box far enough to
access screws.
3.
Pull receptacle (7) from box (8).
0362-1
