DRAFT
TM 5-4210-249-13&P-3
0301
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01673
18. Remove four screws (54), lockwashers (55), washers (56) and control box (15) from vehicle. Discard
19. Remove two relays (24) and (37) from control box (15).
20. Remove four locknuts (57) and mounting plate (58) from control box (15). Discard locknuts.
21. Remove two nuts (59) and (60), sleeves (61) and (62), and strain reliefs (14) and (53) from control box (15).
NOTE
Note position of washers prior to removal to ensure proper installation.
22. Remove four locknuts (63), eight washers (64), four screws (65), and guard (66) from control box door (67).
Discard locknuts.
END OF TASK
CONTROL BOX INSTALLATION
NOTE
Install washers in position as noted prior to removal.
1.
Install guard (66) on control box door (67) with four screws (65), eight washers (64), and four locknuts (63).
2.
Install two strain reliefs (53) and (14) and sleeves (62) and (61) on control box (15) with two nuts (60) and (59).
0301-14