DRAFT
TM 5-4210-249-13&P-2
0165
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03920A
NOTE
When removing cord reel cord, do not cut or disconnect any wires unless instructed to do
so in the procedure.
Step 14.
Unstow cord reel cord (WP 0037). Cut black wire at cord reel junction box. Check for
continuity from black wire (going to circuit breaker) at cord reel junction box, to a known
good ground.
If there is continuity, replace power cord from circuit breaker 2 to cord reel
junction box (WP 0361).
0165-9
