DRAFT
TM 5-4210-249-13&P-2
0165
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03922
NOTE
When removing cord reel, do not cut or disconnect any wires unless instructed to do so in
this procedure.
Step 16.
Unstow cord reel cord (WP 0037). Cut red wire at cord reel junction box. Ensure
jumperwire between red wire at circuit breaker 4 and ground is still installed. Check for
continuity from red wire (going to circuit breaker) at cord reel junction box, to a known
good ground.
If there is no continuity, replace power cord from circuit breaker 2 to cord
reel junction box (WP 0361).
0165-11