DRAFT
TM 5-4210-249-13&P-2
0155
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT04396
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 22.
Put EMERG MASTER and SIDE WARNING switches to OFF position (WP 0007). Turn
Service Drive Lights Off (TM 9-2320-347-10). Remove driver side light bezel cover
(WP 0397). Disconnect driver side body wire harness side warning light connector from
operating side warning light (WP 0351). Disconnect driver side body wire harness side
warning light connector from non-operating upper side warning light (WP 0351).
Connect driver side body wire harness side warning light connector that was
disconnected from operating warning light to non-operating side warning light. Turn
Service Drive Lights On (TM 9-2320-347-10). Put EMERG MASTER and SIDE
WARNING switches to on position (WP 0004). Check if non-operating warning light
operates.
If warning light does not operate while connected to operating driver side
body wire harness warning light connector, replace non-operating warning
light (WP 0351).
0155-14
