DRAFT
TM 5-4210-249-13&P-2
0155
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT04629
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 24.
Put EMERG MASTER and SIDE WARNING switches to off position (WP 0004). Turn
Service Drive Lights Off (TM 9-2320-347-10). Turn battery disconnect switch to OFF
position (WP 0007). Remove driver side light bezel cover (WP 0397). Disconnect
driver side body wire harness side warning light connector from a non-operating upper
side warning light. With a test lead set, check for continuity across wire 2640 (black)
from driver side body wire harness warning light connector, terminal 1 to a known good
ground.
If there is no continuity, go to Step 26.
0155-16
