DRAFT
TM 5-4210-249-13&P-2
0155
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT04629
Step 23.
Put EMERG MASTER and SIDE WARNING switches to off position (WP 0004). Turn
Service Drive Lights Off (TM 9-2320-347-10). Turn battery disconnect switch to OFF
position (WP 0007). Put driver side body wire harness side warning light connectors
back to original positions. Disconnect driver side body wire harness side warning light
connector from non-operating upper side warning light (WP 0351). With a test lead set,
check for continuity across driver side body wire harness wire 2640 (black) from driver
side body wire harness side warning light connector, terminal 1 to a known good
ground.
a.
If there is continuity, repair wire 1650 in driver side body wire harness if
repairable (TM 9-2320-325-14&P), or replace driver side body wire
harness (WP 0448).
b.
If there is no continuity, repair wire 2640 in driver side body wire
harness if repairable (TM 9-2320-325-14&P), or replace driver side
body wire harness (WP 0448).
0155-15