DRAFT
TM 5-4210-249-13&P-2
0138
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03753
Step 17.
Check for continuity across pump operator's panel wire harness wire 3895 (black) from
PUMP HOT audio alarm connector, terminal B to a known good ground.
a.
If there is continuity, replace PUMP HOT PUSH TO TEST
switch (WP 0331).
b.
If there is no continuity, repair wire 1405 in pump operator's panel wire
harness if repairable (TM 9-2320-325-14&P), or replace pump
operator's panel wire harness (WP 0459).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install pump house panel Q if removed (WP 0325)
2.
Install driver side crew cab access panel if removed (WP 0499)
3.
Close pump operator's panel housing if opened (WP 0325)
4.
Remove wheel chocks (TM 9-2320-347-10)
END OF TASK
END OF WORK PACKAGE
0138-13/(14 blank)