DRAFT
TM 5-4210-249-13&P-1
0106
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03421
Step 11.
Connect valve control wire harness connector to driver main inlet valve motor.
Disconnect valve control wire harness connector from TANK FILL & RE-CIRCULATING
valve control. Connect driver main inlet valve control wire harness connector to TANK
FILL & RE-CIRCULATING valve control. While an assistant pushes pump operator's
panel TANK FILL & RE-CIRCULATING valve control OPEN and CLOSE buttons
(WP 0004), check if driver main inlet valve operates.
a.
If driver main inlet valve operates, reconnect valve control wire
harnesses to original positions and replace DRIVER MAIN INLET valve
control (WP 0418).
b.
If driver main inlet valve does not operate, reconnect valve control wire
harnesses to original positions and replace driver main inlet valve
motor (WP 0388).
0106-9
