DRAFT
TM 5-4210-249-13&P-1
0106
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03423
Step 10.
Turn battery disconnect switch to OFF position (WP 0007). Disconnect valve control
wire harness connector from DRIVER MAIN INLET valve control. Disconnect valve
control wire harness connector from driver main inlet valve motor. With a test lead set,
check for continuity across valve control wire harness from DRIVER MAIN INLET valve
control connector to driver main inlet valve motor connector.
If there is no continuity, repair valve control wire harness if repairable
(TM 9-2320-325-14&P), or replace driver main inlet valve control wire
harness (WP 0453).
0106-8
