DRAFT
TM 5-4210-249-13&P-1
0102
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT02576
Step 15.
Turn battery disconnect switch to OFF position (WP 0007). Open pump operator's
panel housing (WP 0325). Disconnect pump operator's panel wire harness FOAM A
LEVEL gauge connector. With a test lead set, check for continuity across pump
operator's panel wire harness wire 3895 (black) from pump operator's panel wire
harness FOAM A LEVEL gauge connector, terminal 2 to a known good ground.
a.
If there is continuity, repair wire 2842 in pump operator's panel wire
harness if repairable (TM 9-2320-325-14&P), or replace pump
operator's panel wire harness (WP 0459).
b.
If there is no continuity, repair wire 3895 in pump operator's panel wire
harness if repairable (TM 9-2320-325-14&P), or replace pump
operator's panel wire harness (WP 0459).
0102-11