DRAFT
TM 5-4210-249-13&P-1
0102
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT02579
Step 14.
Connect cab pump control wire harness cab power distribution wire harness connector.
Remove driver side crew cab access panel (WP 0499). Remove pump house panel
Q (WP 0540). Disconnect main wire harness pump operator's panel wire harness
connector DO2. With a test lead set, check for 22 to 28 VDC between main wire
harness wire 2342 (red) at main wire harness pump operator's panel wire harness
connector DO2, terminal 1 and a known good ground.
If 22 to 28 VDC are not present, go to Step 16.
0102-10