DRAFT
TM 5-4210-249-13&P-1
0074
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03513
NOTE
It is mandatory to choose a ground on vehicle chassis for checking continuity in Step 9.
Using a ground on pump engine may give a false continuity reading and will not ensure
that pump engine is properly grounded.
Step 9.
Turn battery disconnect switch to OFF position (WP 0007). Check for continuity across
pump engine ground from pump engine starter casing to a known good ground.
If there is continuity, replace pump engine starter (WP 0248).
Step 10.
With a torque wrench, tighten starter bolts to 35 lb-ft (48 Nm). Check for continuity
across pump engine ground from pump engine starter casing to a known good ground.
a.
If there is continuity, fault corrected.
b.
If there is no continuity, replace pump engine ground cable (WP 0368).
0074-9
