DRAFT
TM 5-4210-249-13&P-1
OPERATOR MAINTENANCE
FOAM SYSTEM AND INSTRUMENT PANEL-STANDBY MODE
INSTRUMENT PANEL-STANDBY MODE
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 5, 66
Open and close all valves slowly during any procedure. Sudden changes in
pressure may cause equipment to react faster than personnel can be alerted.
Ensure surrounding personnel are aware of changes being made to settings on
equipment. Failure to comply may result in injury or death to personnel and
damage to equipment.
NOTE
For operation of pump, most controls and procedures will be the same whether pumping
from tank, draft, or hydrant.
Operator must make sure that:
1.
ALL water discharge valve controls are in CLOSED position (WP 0004).
2.
ALL water inlets are in CLOSED position (WP 0004).
3.
ALL DRAINS are in CLOSED position (WP 0004).
4.
ALL foam controls are in CLOSED/OFF position (WP 0004).
5.
ALL inlet and outlet ports are capped (WP 0004).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0032-1