DRAFT
TM 5-4210-249-13&P-1
0026
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT04841
14. Put DIRECT TANK FILL switch (10) to AUTO position. Indicator lights (11) and (12) will illuminate.
15. Complete mission.
16. Shut off water pump engine (WP 0022).
NOTE
Perform Steps (17) through (21) if direct tank fill was performed.
17. Shut off positive water source valve.
18. Put DIRECT TANK FILL switch (10) to OPEN position. Indicator light (11) will go out.
19. Relieve pressure in hose, if necessary, put DIRECT TANK FILL switch (10) to OFF position. Indicator
light (12) will go out.
20. Remove hose from positive water source and direct tank fill inlets as required.
21. Perform post operation procedures (WP 0041).
END OF TASK
END OF WORK PACKAGE
0026-4