TM 5-4210-233-14&P-2
6-74. SWING CROSSOVER RELIEF VALVE MANIFOLD BLOCK
This task covers:
a Disassembly
c Assembly
b Cleaning and Inspection
d. Follow-on Maintenance
TOOLS REQUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Swing Crossover Relief Valve Manifold Block
(Appendix B, Section III, Items 1 and 4)
Removed (see para 5-55.)
MATERIALS/PARTS REQUIRED
Dry Cleaning Solvent (Item 3, Appendix E)
Hydraulic Oil (Item 28, Appendix E)
Seal Kits (Figure 174, Appendix F)
a. Disassembly.
(1) Remove two hollow hex plugs (1) and seven hex head plugs (2).
(2) Remove two 900 swivel fittings (3).
(3) Remove shuttle valve (4).
(4) Remove two single check valves (5).
(5) Remove three thermal relief valves (6).
(6) Remove four adapters (7 and 8).
(7) Remove restrictor pipe plug (9).
6-430
