TM 5-4210-233-14&P-2
6-57. FORWARD CLUTCH ASSEMBLY
This task covers:
a. Removal
d.
Assembly
b. Disassembly
e.
Installation
c. Cleaning and Inspection f.
Follow-on Maintenance
TOOLS REQUIRED
MATERIALS/PARTS REQUIRED
Tool Kit, General Mechanics, Automotive
Oil Lubricating (item 10, Appendix E)
(Appendix B, Section III, Item 1)
Solvent, Dry Cleaning (item 3, Appendix E)
Compound, Retaining (Item 6, Appendix E)
Shop Equipment, Automotive
Seal Rings (Figure 135, Appendix F)
Maintenance and Repair
(Appendix B, Section III, Item 4)
PERSONNEL REQUIRED: 2
Clutch Spring Compressor
EQUIPMENT CONDITION
(Appendix B, Section III, Item 73)
Control Valve Body Removed (see para 6-62.)
Collector Ring Installer and Staking Set
Torque Converter Housing Removed (see
(Appendix B, Section III, Item 74)
Forward Clutch Piston Inner Seal Protector
(Appendix B, Section III, Item 75)
PTO Gear Removal Fixture
(Appendix B, Section III, Item 76)
Fourth Clutch Alignment Fixture
(Appendix B, Section III, Item 77)
FABRICATED TOOLS
Shim Stock, Item 2, Appendix B
a. Removal.
(1)
Hold turbine shaft (1) and remove forward clutch assembly (2), outer race (3), roller bearing (4),
and inner race (5).
(2)
Place forward clutch assembly (2) in clean area.
6-316
