TM 5-4210-233-14&P-2
6-57. FORWARD CLUTCH ASSEMBLY - Continued
(16)
Place PTO gear removal fixture (Appendix B,
Section III, Item 76) in press.
(17)
Install forward clutch assembly (4) on PTO gear
removal fixture.
(18)
Install PTO removal tool in forward clutch assembly
(4).
19)
Find gap in retaining ring (20).
(20)
Install shim stock between retaining ring (20) and
teeth of PTO gear (21). Push retaining ring in
forward clutch assembly (4). Put shim stock every 3
in. (76 mm) around forward clutch assembly.
(21)
Press forward clutch assembly (4) out of PTO gear
(21).
(22)
Remove PTO gear (21), forward clutch assembly
(4), PTO gear removal tool, and PTO gear removal
fixture from press.
c. Cleaning and Inspection.
WARNING
Dry cleaning solvent P-D-680 is potentially dangerous. Avoid
repeated and prolonged breathing of vapors and skin contact
with the liquid. Do not use near open flame, arcing equipment
or other ignition sources. Always wear eye protection and
protective clothing. The flash point of P-D-680 is 100 to 138
deg. F (38 to 59 deg. C).
(1)
Clean ail metal parts with dry cleaning solvent
(Item 3, Appendix E) and inspect for damage.
Replace damaged parts.
(2)
Turbine shaft is pressed in forward clutch
housing and should be tight. Replace forward clutch
housing if there is any up and down movement.
6-321