TM 5-4210-233-14&P-2
6-46. CRANKSHAFT FRONT COVER AND OIL PUMP
THIS TASK COVERS:
a.
Removal
c.
Installation
b.
Cleaning and Inspection
d.
Follow-on Maintenance
TOOLS REQUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12.)
(Appendix B, Section 111, Item 1)
APU Shutdown (see para 2-16.)
Seal Installer (Appendix B, Section III, Item 56)
Batteries Disconnected (see para 4-114.)
Oil Seal Expander (Appendix B, Section 111, Item 57)
Crankshaft Pulley Removed (see para 6-25.)
Guide Stud (Appendix B, Section 111, Item 58)
Crankshaft Vibration Damper Removed
(see para 6-26.)
MATERIALSIPARTS REQUIRED
Oil Pan Removed (see para 5-27.)
Engine Oil (OE) (Item 20, Appendix E)
Oil Pump Inlet Removed (see para 6-44.)
Solvent Dry Cleaning (Item 3, Appendix E)
Gasket (Figure 11O, Appendix F)
a. Removal.
(1) Remove two screws (1) and lockwashers (2), four screws (3) and lockwashers (4), and two screws (5)
and lockwashers (6).
(2) Strike the edges of the front cover (7) with a soft hammer to free cover from dowel pins. Pull cover
assembly straight off the end of the crankshaft.
6-249