TM 5-4210-233-14&P-2
6-31. FLYWHEEL HOUSING AND REAR OIL SEAL- Continued
NOTE
Tag and mark all screws.
(5) Remove six screws (10) and washers (11)
from flywheel housing (1).
(6) Remove six screws (12) and (lockwashers
(13) from flywheel housing (1).
(7) Remove four screws (14) and washers (15)
from flywheel housing (1).
NOTE
Screws (16) and washers (17) must not be reused.
(8) Remove three screws (16) and washers
(17) from flywheel housing (1).
(9) Remove five screws (18) and lockwashers
(19) from access cover (20).
(10) Remove screw (21) and copper washer
(22).
(11) Remove access cover (20) and gasket
(23). Discard gasket.
6-164