TM 5-4210-233-14&P-2
6-30. FLEXPLATE-Continued
b. Installation.
(1) Align screw holes in hub (7) with crankshaft (8) in flywheel housing (3).
WARNING
Adhesives, solvents, and sealing compounds can burn easily,
can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and
use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap
and water.
(2) Apply international No. 2 compound (Item 37, Appendix E) to 12 screws (5).
(3) With rough side toward engine, install hub (7), plate (6), and 12 screws (5). Tighten screws to 50 Ib-ft
(67 Nm) and an additional turn.
(4) Apply international No. 2 compound (Item 37, Appendix E) to 12 screws (1).
(5) Align screw holes in five disks (4) and plate (2) with hub (7).
(6) Install five disks (4), plate (2), and 12 screws (1). Tighten screws to 100 Ib-ft (135 Nm).
c.
Follow-on Maintenance.
(1) Install transmission (see para 6-47).
6-162
