SECTION IX. MAINTENANCE OF HOSE BODY ASSEMBLY

TM 5-4210-224-14&P

SECTION IX. MAINTENANCE OF HOSE BODY ASSEMBLY

Para.

Ladder Mounting Brackets Re-

Back-Up, Turn and Stop Lights

placement................................ .................. 4-45

Maintenance ................................ ............. 4-50

Rear Back-Up Alarm Replacement................... 4-51

Compartment Lights Maintenance.................... 4-55

Rear Compartment Replacement..................... 4-60

Compartment Panels Replacement.................. 4-57

Rear Platform and Steps Re-

Fill Tower Bracket Replacement....................... 4-58

placement ................................ ................. 4-53

General ................................ ........................... 4-43

Rear Platform Signal Switch

Handrails Replacement ................................ ... 4-44

Replacement ................................ ............ 4-52

Hard Suction Hose Bracket

Rear Station Charger Replace-

Replacement ................................ ............ 4-46

ment ................................ ......................... 4-54

Hose Bed Floor and Supports

Rear Suction Stub Replacement ...................... 4-47

Replacement ................................ ............ 4-59

Rear Warning Lights Maintenance ................... 4-49

Hose Bed Pick-Up Lights and

Side Panels Replacement ............................... 4-61

Mounting Brackets Maintenance

4-48

Tread Plates Replacement .............................. 4-56

4-43. GENERAL.

This section contains information on the maintenance of the hose body assembly that are maintainable at the

Organizational level.

4-44. HANDRAILS REPLACEMENT.

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

General Mechanics Tool Kit

General Safety Instructions

Engine OFF

Materials/Parts

Transmission in (N) neutral.

Parking brake and micro-brakelock set.

Handrail (117-00001-D)

REMOVAL

a. Remove two bolts (1), nuts (2), and lock

washers (3) at top mounting bracket (4) and

bottom mounting bracket (5) on each rear side

of the hose body (6).

b. Remove handrail (7).

c. Remove two screws (8) from both hose bed

floor pick-up light mounting brackets (9).

d. Remove top handrail (10).

4-77