Table 4-4. Organizational Troubleshooting Chart - continued

TM5-4210-224-14&P

Table 4-4. Organizational Troubleshooting Chart.(Continued)

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

Step 2. Inspect for worn brake lining.

Replace brake lining (paragraph 4-208).

Step 3. Inspect brake drums or rotors for heat spots or scores.

Replace drums or rotors (paragraph 4-233).

57. BRAKES SQUEAK DURING APPLICATION.

Step 1. Inspect for uneven brake lining wear.

Replace brake lining (paragraph 4-208).

Step 2. Check brake drums for out-of-round.

Replace brake drums (paragraph 4-233).

STEERING ASSEMBLY

58. EXCESSIVE PLAY OR LOOSENESS.

Step 1. Inspect for worn steering shaft couplings.

Step 2. Inspect for worn upper ball joints.

Replace ball joints (paragraph 4-237).

Step 3. Inspect for loose pittman arm, tie rods or steering arms.

Tighten as necessary.

59. HARD STEERING.

Step 1. Check tires for proper inflation Inflate to recommended pressure.

Step 2. Inspect steering linkage for proper lubrication.

Lubricate as necessary.

Step 3. Check front end for proper alignment.

Align front end.

POWER STEERING SYSTEM

60. BELT SQUEAL.

Inspect for loose belt.

Adjust belt tension (paragraph 4-76).

4-41