 |
|||
|
|
|||
|
Page Title:
STEERING KNUCKLE AND ARM REPLACEMENT. |
|
||
| ||||||||||
|
|
 TM 5-4210-224-14 & P
4-236. SPINDLE REPLACEMENT. (Continued)
h. Install wheel hub/rotor assembly. (paragraph 4-
j. Torque the wheel stud nuts to 140 ft-lbs (190
218)
N.m).
i. Install the wheel and tire assembly (paragraph
k. Lower the vehicle to the ground.
4-237. STEERING KNUCKLE AND ARM REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Equipment Condition
Tools
Para.
Condition Description
King Pin Installer
(J-28871)
Wheel Assembly Removed
Front Pinion Bearing Installer
Wheel Hub/Rotor Removed
(J-7817)
Spindle Removed
King Pin Bearing Seal Installer
Manual Locking Hub Removed
(J-22301)
Jack
General Safety Instructions
Jack Stand
Engine OFF
General Mechanics Tool Kit
Transmission in (N) neutral.
Grease Packer, Cone Type
Parking brake and micro-brakelock set
Materials/Parts
Grease, Lubricating
Steering Knuckle (462853)
REMOVAL
a. Remove the upper cap (1) by removing the
bolts (2) and washers (3) alternatively as the
compression spring will force the cap up.
b. Remove the steering arm (4) by removing the
nuts (5) alternatively as the compression spring
(6) will force the steering arm up.
4-332
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals