 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4210-224-14 & P
4-233. WHEEL HUB/ROTOR REPLACEMENT.
This task covers:
a. Removal
b. Installation
Equipment Condition
Para.
Condition Description
INITIAL SETUP:
Tire and Wheel Assembly
Tools
Removed
Torque Wrench Adapter
Brake Calipers Removed
(J-23446)
Locking Hub Removed
Wheel Bearing Nut Wrench
(J-26878-A)
General Safety Instructions
Drive Handle
Engine OFF
(J-8092)
Transmission in (N) neutral.
Bearing Race Installer (Outer)
Parking brake and micro-brakelock set
(J-6368)
Batteries disconnected.
Bearing Race Installer (Inner)
(J-23448)
Materials/Parts
General Mechanics Tool Kit
Cleaning Solvent
Brass Drift Punch
Hammer
Brush, Medium Bristle
Jack Stand
(Appendix D, Item 6)
Grease, Lubricating
Wheel Hub/Rotor (352982)
REMOVAL
a. Raise the vehicle and support it with suitable
jack stands.
b. Remove the locking nut (2), ring (3), and
adjusting nut (4) using the wheel bearing nut
wrench.
c. Remove the hub/rotor assembly (8).
NOTE
The outer wheel bearing (5) will
slide off the spindle (12) ahead of
the hub/rotor (8).
d. Use a brass drift punch and hammer for the seal
(11) and races (6 and 9).
NOTE
The inner bearing (10), race (9) are
behind the seal (11). Check all
bearings and races for signs of
damage or wear.
If either is
evident,
replace
part(s)
as
necessary.
4-325
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals