 |
|||
|
|
|||
|
Page Title:
Vacuum and Hydrant Pressure Gage |
|
||
| ||||||||||
|
|
 (1)
Clean all parts with a clean cloth dampened
in an approved cleaning solvent, and dry
thoroughly.
(2) Inspect all parts for damaged or defective
condition.
(3) Replace or repair damaged or defective
parts as necessary.
c. Installation.
(1) Refer to figure 56, and install the tacho-
meter-hourmeter on the pump gage panel
and transfer case.
(2) Refer to figure 48, and install the cover.
116. Discharge Pressure Gage
a. Removal.
(1) Refer to figure 48, and remove the cover.
(2) Refer to figure 56, and remove the discharge
pressure gage from the pump gage panel.
b. Cleaning, Inspection, and Repair.
(1) Clean all parts with an approved cleaning
solvent, and dry thoroughly.
(2) Inspect all parts for damaged or defective
Figure 56. Tachometer-hourmeter, pump control
condition.
panel, and gages, removal and installation.
(3) Replace or repair damaged or defective
parts as necessary.
(2)
Inspect all parts for damaged or defective
c. Installation,.
condition.
(1) Refer to figure 56, and install the discharge
(3) Replace or repair damaged or defective
pressure gage on the pump gage panel.
parts as necessary.
(2) Refer to figure 48, and install the cover.
c.
Installation.
(1) Refer to figure 55, and install the left side
117. Vacuum and Hydrant Pressure Gage
control panel and bottom panel on the pump
a. Removal.
compartment.
(1) Refer to figure 48, and remove the cover.
(2) Install the engine, dome and pump gage
(2) Refer to figure 56, and remove the hydrant
control panel light switch (paras. 99, 100,
pressure gage from the pump) gage panel.
and 101).
b. Cleaning, Inspection, and Repair.
(3) Install the hose reel switch (para. 102).
(1) Clean all parts with an approved cleaning
(4) Install the throttle control (para. 76).
solvent, and dry thoroughly.
(2) Inspect all parts for damaged or defective
115. Tachometer-Hourmeter
condition.
a. Removal.
(3) Replace or repair damaged or defective
(1) Refer to figure 48, and remove the cover.
parts as necessary.
(2) Refer to figure 56, and remove the
c. Installation.
tachometer-hourmeter from the pump gage
(1) Refer to figure 56, and install the vacuum
panel and transfer case.
hydrant pressure gage on the pump gage
b. Cleaning, Inspection, and Repair.
panel.
(2) Refer to figure 48, and install the cover.
TAGO 6839A
79
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals