|
|
(4) Inspect lamps for cracks, breaks, or
burned out condition.
underhood lights on the fire truck radiator mounting
bracket.
86. Siren Solenoid Relay
b. Cleaning, Inspection, and Repair.
(1) Clean all parts with a clean cloth
dampened in an approved cleaning
solvent, and dry thoroughly.
(2) Inspect all parts for damaged or defective
condition.
(3) Replace or repair damage( or defective
parts as necessary.
87. Engine Oil Pressure Sending Unit
engine oil pressure sending unit from the engine.
b. Cleaning, Inspection, and Repair.
(1) Clean all parts with a clean cloth
dampened in an approved cleaning
solvent, and dry thoroughly.
(2) Inspect all parts for damaged or defective
condition.
(3) Replace or repair damaged or defective
l)arts as necessary.
Figure 38. Beacon warning light, removal and
installati on.
engine oil pressure sending unit on the engine.
e. Installation. Refer to figure 38, and install the
88. Engine Temperature Sending Unit
beacon warning light on the fire truck cab.
engine temperature sending unit form the engine
85. Underhood Lights
b. Cleaning, Inspection, and Repair.
a. Removal. Refer to figure 40, and remove the
(1) Clean all parts with a clean cloth
underhood lights from the fire truck radiator mounting
dampened in a n approved cleaning
bracket.
solvent, and dry thoroughly.
b. Cleaning, Inspection, and Repair
(2) Inspect all parts for damaged or defective
(1) Clean all parts with a clean cloth
condition.
dampened in an approved cleaning
(3) Replace or repair damaged or defective
solvent and dry thoroughly.
parts as necessary.
(2) Inspect body for damaged or defective
condition.
engine temperature sending unit on the engine.
(3) Replace or repair damaged or defective
parts as necessary.
63
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |