Chapter 1. INTRODUCTION - TM-9-4931-363-14-P0009

TM 9-4931-363-14&P

CHAPTER 1

INTRODUCTION

Section I. GENERAL

1-4. Destruction of Materiel to Prevent Enemy Use.

1-1. Scope.

This manual is for your use in operating and maintaining

Refer to TM 750-244-1-5 for procedures to be used in

the AN/GSM-249 Fire Control Subsystem Test Set (the test

destruction of the test set to prevent use by the enemy.

set). The manual is divided into five chapters and three

1-5. Calibration.

provides detailed theory of operation, and Chapter 3

provides operating instructions. Chapter 4 provides

The digital multimeter in the test set is to be calibrated

maintenance instructions, and Chapter 5 provides final

periodically. These calibration instructions are contained in

inspection instructions. Appendix A is a list of references.

TB 9-4931-363-50.

Appendix B contains a Basic Issue Items List and Repair

Parts and Special Tools List. Appendix C is the

1-6. Quality Assurance/Quality Control (QA/QC).

Maintenance Allocation Chart.

There are no QA/QC requirements for the test set.

1-2. Maintenance Forms and Records.

1-7. Reporting Equipment

Improvement

Maintenance forms, records, and reports which are to be

Recommendations (EIRs).

used by maintenance personnel at all maintenance levels are

listed and prescribed in TM 38-750, The Army Maintenance

Management Systems (TAMMS).

EIRs will be prepared on DA Form 2407, Maintenance

Request. Instructions for preparing EIRs are provided in

1-3. Administrative Storage.

TM 38-750, The Army Maintenance Management System.

EIRs should be mailed directly to Commander, U.S. Army

Administrative storage of the test set shall be

A r m a m e n t Materiel Readiness Command, ATTN:

accomplished in accordance with the provisions of TM

DRSAR-MAS, Rock Island, Illinois 61201. A reply will be

740-90-1.

furnished directly to you.

1-1