DRAFT
TM 5-4210-249-13&P-4
0602
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00997A
NOTE
Note position of washers and lockwashers prior to removal to ensure proper installation.
5.
Remove two nuts (10), lockwashers (11), washers (12), screws (13), washers (14), and valve body (15) from
bracket (16). Discard lockwashers.
6.
Remove nut (17) and solenoid (18) from valve body (15).
7.
Remove switch (19) from valve body (15).
8.
Remove tee (5), elbow (7), fitting (9), and three preformed packings (20), (21), and (22) from valve body (15).
Discard preformed packings.
END OF TASK
INSTALLATION
1.
Install three preformed packings (22), (21), and (20), fitting (9), elbow (7), and tee (5) on valve body (15).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
2.
Apply sealing compound on threads of switch (19).
3.
Install switch (19) on valve body (15).
4.
Install solenoid (18) on valve body (15) with nut (17).
0602-2