DRAFT
TM 5-4210-249-13&P-4
FIELD LEVEL MAINTENANCE
HYDRAULIC GENERATOR OIL DRAIN/FILL
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
Reference
Drain Pan (WP 0622, Item 9)
Tool Kit, General Mechanic's: Automotive
WP 0615, Fig. 178
(WP 0622, Item 27)
Equipment Conditions
Materials/Parts
Water pump engine OFF (WP 0022)
Oil, Hydraulic, Dexron III (WP 0625, Item 36)
Batteries disconnected (TM 9-2320-325-14&P)
DRAIN
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 13
The TFFT hydraulic system operates at pressures up to 5075 psi (34,992 kPa).
Allow several minutes to elapse after shutting off engine, to allow pressure to
relieve itself before attempting to remove hoses or fittings. Failure to comply may
result in serious injury or death to personnel.
Hydraulic oil may be hot. Ensure hydraulic oil is cool prior to removal. Failure to
comply may result in injury to personnel.
CAUTION
Ensure hydraulic oil is free from all foreign contaminates. Failure to comply may
cause damage to equipment.
NOTE
Hydraulic reservoir holds a 7.75 gal. (29.33 l), be sure to use suitable drain pan.
0588-1
