DRAFT
TM 5-4210-249-13&P-4
0581
NOTE
Rotating stanchion on nozzle body allows for easier installation of 54 ball bearings.
5.
Lightly grease 54 ball bearings (64), and install 54 ball bearings (64) through hole in stanchion (59).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
NOTE
Installing set screw too deep on stanchion will not allow nozzle body to rotate properly.
Set screw must be installed so that nozzle body rotates freely.
6.
Apply thread lock adhesive to set screw (63).
7.
Install set screw (63) on stanchion (59).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0581-17
