DRAFT
TM 5-4210-249-13&P-4
0581
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
NOTE
Install upper control block on control rod with same number of exposed threads as noted
prior to removal.
13. Apply thread lock adhesive to set screw (54).
14. Install upper control block (53) on control rod (47) with set screw (54).
15. Install two upper control links (52) on upper control block (53) with clevis pin (51) and two cotter pins (50).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01853
16. Apply silicone lubricant on two preformed packings (49) and (48) and install two preformed packings (49)
and (48) on siamese base (36).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
17. Apply thread lock adhesive to threads on control rod (47).
18. Install lower control block (46) on control rod (47) with nut (45).
0581-19
