DRAFT
TM 5-4210-249-13&P-4
0581
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01855
CAUTION
Fifty-four ball bearings are positioned between each stanchion and nozzle body.
After removing set screw, ball bearings are removed through hole by rotating
stanchion on nozzle body. Care must be taken when removing ball bearings not to
lose ball bearings.
NOTE
Both stanchions are removed from nozzle body the same way.
25. Remove set screw (63), 54 ball bearings (64), and stanchion (59) from nozzle body (65).
26. Remove two preformed packings (66) and (67) from nozzle body (65). Discard preformed packings.
27. Remove two cotter pins (68), clevis pin (69), and two upper control links (52) from nozzle body (65). Discard
cotter pins.
0581-13
