DRAFT
TM 5-4210-249-13&P-4
0581
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01852
19. Position bearing ring (44) in roof pot (35).
NOTE
Rotating bearing ring on roof pot allows for easier installation of 79 ball bearings.
20. Lightly grease 79 ball bearings (43) and install 79 ball bearings (43) through hole in roof pot (35).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
NOTE
Installing set screw too deep on roof pot will not allow roof turret to rotate properly. Set
screw must be installed so that roof turret rotates properly.
21. Apply thread lock adhesive to set screw (42).
22. Install set screw (42) on roof pot (35).
23. Place gasket (41) on roof pot (35).
0581-20