DRAFT
TM 5-4210-249-13&P-4
FIELD LEVEL MAINTENANCE
TURRET BUMPER MOUNT REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
Materials/Parts (continued)
Tool Kit, General Mechanic's: Automotive
Lockwasher (2)
(WP 0622, Item 27)
References
Personnel Required
WP 0615, Fig. 166
MOS 63B Wheeled vehicle mechanic (2)
Equipment Conditions
Materials/Parts
Bumper turret removed (WP 0569)
Locknut (2)
Skid plate grille removed (WP 0550)
Lockwasher (4)
REMOVAL
TFFT2803
NOTE
Note quantity and position of shims prior to removal to ensure proper installation.
Shims are positioned between bumper turret mount and bumper turret pipe.
1.
Remove two locknuts (1), three shims (2), and U-bolt (3) from bumper turret mount (4) and bumper turret
pipe (5). Discard locknuts.
NOTE
Note position of washers prior to removal to ensure proper installation.
Window deluge brackets are attached to outside of bumper turret mount.
2.
Remove four nuts (6), lockwashers (7), eight washers (8), four screws (9), and two window deluge
brackets (10) from bumper turret mount (4). Discard lockwashers.
0566-1