DRAFT
TM 5-4210-249-13&P-4
0565
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00857
1.
Clean mating surface of roof turret mounting plate (3) and mating surface of vehicle with solvent cleaning
compound.
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
CAUTION
Do not over tighten locknuts. Over tightening locknuts will crush cab frame
members.
2.
Apply silicone sealant to perimeter and mounting holes on bottom of roof turret mounting plate (3).
3.
Install roof turret mounting plate (3) on vehicle with seven screws (5) and locknuts (4).
4.
Install roof turret mounting plate (3) on vehicle with screw (2) and locknut (1).
END OF TASK
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0565-3
