DRAFT
TM 5-4210-249-13&P-3
0558
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT01922A
16. Lightly lubricate six screws (62).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
17. Apply sealant to three locknuts (60) to mark torque point.
18. Install each of two transmission mounting brackets (59) on three biscuits (66) and transmission mounting
support (67) with three screws (62), washers (63), plate (64), three mounting biscuits (65), washers (61), and
locknuts (60). Tighten screws to 170 lb.-ft. (231 Nm).
19. Remove lifting device, two nuts (57), and eye bolts (56) from rear attachment points (58) and transmission
mounting brackets (59).
0558-14