DRAFT
TM 5-4210-249-13&P-3
0558
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT04095
12. Position three mounting biscuits (66) on each of two transmission mounting supports (67).
13. Attach two eye bolts (56) and nuts (57) on rear attachment points (58).
CAUTION
Chains of suitable lifting device must be attached to transmission as noted prior to
removal. Transmission must be installed at same angle in which it was removed.
Failure to install at proper angle may not allow lifting chains to clear wire harness
supporting crossmember.
14. Attach suitable lifting device on two rear eye bolts (56) and around transmission mounting brackets (59).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 10
Keep out from under heavy parts. Falling parts may cause serious injury or death to
personnel.
15. With the aid of an assistant and a suitable lifting device, guide transmission (25) on two transmission mounting
supports (67).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0558-13