DRAFT
TM 5-4210-249-13&P-3
0543
20. Remove two nuts (70), screws (71), cushion clips (72), and cable (73) from side shelf (63).
21. Remove four nuts (74), lockwashers (75), eight washers (76), and four screws (77) from side shelf (63) and
vehicle. Discard lockwashers.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 7
Side shelf is heavy. Do not attempt to lift side shelf without the aid of an assistant.
Failure to comply may result in injury to personnel.
22. With the aid of an assistant, remove four nuts (78), lockwashers (79), washers (80), washers (81),
screws (82), and side shelf (63) from vehicle. Discard lockwashers.
END OF TASK
INSTALLATION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 7
Side shelf is heavy. Do not attempt to lift side shelf without the aid of an assistant.
Failure to comply may result in injury to personnel.
NOTE
Perform Steps (1) through (4) if side shelf was removed.
1.
With the aid of an assistant, install side shelf (63) on vehicle with four screws (82), washers (81),
washers (80), lockwashers (79), and nuts (78).
2.
Secure side shelf (63) to vehicle with four screws (77), eight washers (76), four lockwashers (75), and
nuts (74).
3.
Install cable (73) on side shelf (63) with two cushion clips (72), screws (71), and nuts (70).
4.
Install cord reel cord assembly (69) (WP 0380).
5.
Install small trough (68) on vehicle with four screws (67), washers (66), lockwashers (65), and nuts (64).
NOTE
Both large troughs are installed the same way. R-40 ram trough shown.
6.
Install large trough (62) on side shelf (63) with four screws (61), washers (60), nuts (59).
0543-7