DRAFT
TM 5-4210-249-13&P-3
FIELD LEVEL MAINTENANCE
CORD REEL CONTROL ASSEMBLY REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
WP 0615, Fig. 76
(WP 0622, Item 27)
Equipment Conditions
Materials/Parts
Batteries disconnected (TM 9-2320-325-14&P)
Compound, Sealing (WP 0625, Item 17)
Decal plates removed (WP 0518)
Tags, Identification (WP 0625, Item 51)
Locknut (1)
REMOVAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT02914
NOTE
Tag and mark wires prior to removal to ensure proper installation.
1.
Remove two screws (1) and wires (2) from cord reel switch (3).
2.
Loosen locknut (4) on cord reel switch (3).
3.
Remove cord reel switch cover (5), switch guard (6), and cord reel switch (3) from cord reel switch bracket (7).
4.
Remove locknut (4) from cord reel switch (3). Discard locknut.
NOTE
Perform Step (5) if cord reel switch bracket needs to be removed.
5.
Remove two screws (8) and cord reel switch bracket (7) from rear compartment (9).
END OF TASK
0380-1