DRAFT
TM 5-4210-249-13&P-3
0543
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT02165
11. Remove four nuts (35), washers (36), screws (37), and angle cover (38) from shelf (30).
12. Remove four nuts (39), washers (40), screws (41), and hinge (42) from angle cover (38).
13. Remove four nuts (43), washers (44), screws (45), and hinge (42) from cover (46).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 26
Wear goggles and use care when replacing spring. Spring is under tension and can
act as a projectile when released. Failure to comply may result in injury to
personnel.
NOTE
Note position of spring prior to removal to ensure proper installation.
14. Bend two tabs (47) back and remove spring (48) from hinge (42).
NOTE
All three tubes are removed the same way. Sledge hammer tube shown.
15. Remove four nuts (49), lockwashers (50), eight washers (51), four screws (52), and tube (53) from shelf (30).
Discard lockwashers.
0543-5
