DRAFT
TM 5-4210-249-13&P-3
0543
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 26
Wear goggles and use care when replacing spring. Spring is under tension and can
act as a projectile when released. Failure to comply may result in injury to
personnel.
NOTE
Install spring as noted prior to removal.
9.
Install spring (48) on hinge (42).
10. Secure spring (48) in place by bending two tabs (47).
11. Install hinge (42) on cover (46) with four screws (45), washers (44), and nuts (43).
12. Install hinge (42) on angle cover (38) with four screws (41), washers (40), and nuts (39).
13. Install angle cover (38) on shelf (30) with four screws (37), washers (36), and nuts (35).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT02164
14. Install shelf support (28) on vehicle with three screws (34), six washers (33), three lockwashers (32), and
nuts (31).
0543-9
