DRAFT
TM 5-4210-249-13&P-3
0540
PUMP PANEL M INSTALLATION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT0237
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
1.
Install small compartment door (19) on pump panel M (5) (WP 0551).
2.
Install two rubber guards (18) on small compartment door (19).
3.
Install decal plate (17) on pump panel M (5) (WP 0518).
4.
Install pump house access door (16) on pump panel M (5) (WP 0538).
5.
Install pump house panel M (5) on vehicle with four washers (15), lockwashers (14), and screws (13).
6.
Install gasket (12) and cover plate (11) on pump panel M (5) with four washers (10) and screws (9).
7.
Apply sealing compound to threads of passenger side auxiliary inlet pipe (8).
8.
Install coupling (7) on passenger side auxiliary inlet pipe (8).
9.
Install cap (6) on coupling (7).
10. Install clip (4) on pump panel M (5) with washer (3), lockwasher (2), and screw (1).
END OF TASK
0540-21
