DRAFT
TM 5-4210-249-13&P-3
0538
INSTALLATION
1.
Install seal (12) on pump access door (1).
2.
Install spring (11) in place by bending two tabs (10).
3.
Secure spring (11) in place by bending two tabs (10).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TFFT00145
4.
Install hinge (5) on pump house access door (1) with two screws (9), washers (8), and locknuts (7).
5.
Install hinge (5) on pump panel (6) with two screws (4), washers (3), and locknuts (2).
6.
Close pump house access door (1).
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-347-10)
END OF TASK
END OF WORK PACKAGE
0538-3/(4 blank)