DRAFT
TM 5-4210-249-13&P-3
FIELD LEVEL MAINTENANCE
ON-BOARD TOOL MOUNTING BRACKET(S) REPLACEMENT
INITIAL SETUP:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
WP 0615, Fig. 165
(WP 0622, Item 27)
Equipment Conditions
Materials/Parts
Water pump engine OFF (WP 0022)
Lockwasher (4)
Engine OFF (TM 9-2320-347-10)
Lockwasher (2)
Wheels chocked (TM 9-2320-347-10)
Lockwasher (2)
CREW CAB ON-BOARD TOOL MOUNTING BRACKET REMOVAL
TFFT00311
NOTE
All four tool mounting brackets are removed the same way. Rear driver side mounting
bracket shown.
Front wrench holder requires removal of hydrant wrench and two hose picks.
1.
Remove two spanner wrenches (1) from wrench holder (2).
2.
Remove four screws (3), lockwashers (4), washers (5), and mounting bracket (6) from vehicle. Discard
lockwashers.
3.
Remove two screws (7), lockwashers (8), washers (9), and wrench holder (2) from mounting bracket (6).
Discard lockwashers.
END OF TASK
0528-1
