DRAFT
TM 5-4210-249-13&P-3
0527
ARSON HANDLE BRACKET REMOVAL
TFFT01752
NOTE
All arson handle brackets are removed the same way.
Remove two screws (1), lockwashers (2), washers (3), and bracket (4) from compartment (5). Discard
lockwashers.
END OF TASK
ARSON HANDLE BRACKET INSTALLATION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
NOTE
All arson handle brackets installed the same way.
1.
Apply thread lock adhesive on threads of two screws (1).
2.
Install bracket (4) in compartment (5) with two washers (3), lockwashers (2), and screws (1).
END OF TASK
0527-24
