DRAFT
TM 5-4210-249-13&P-3
0527
ADAPTER BRACKET REMOVAL
TFFT01751
NOTE
All adapter brackets are removed the same way.
1.
Remove three screws (1), lockwashers (2), washers (3), and plate (4) from compartment (5). Discard
lockwashers.
2.
Remove two nuts (6), screws (7) and bracket (8) from plate (4).
END OF TASK
ADAPTER BRACKET INSTALLATION
1.
Install bracket (8) on plate (4) with two screws (7) and nuts (6).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
ICON 30, 44, 27
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
NOTE
All adapter brackets are installed the same way.
2.
Apply thread lock adhesive on threads of three screws (1).
3.
Install plate (4) in compartment (5) with three washers (3), lockwashers (2), and screws (1).
END OF TASK
0527-27